Opus A6 human machine interface

Save as PDF

When that certain extra features should not be missing the Opus A6s is your man: With encoder, three hard and twelve soft function keys, as well as options like Ethernet, Bluetooth®, three camera inputs and much more.


Standalone or dashboard mount, orientation landscape or optional portrait, approx (W x L x H) 258 mm x 136 mm x 70 mm, incl encoder, excl connector and cables


7 inch, 15:9, TFT, transmissive, 800 × 480 pixel, 500 cd/m2 max brightness, transmissive, 600:1 min contrast or higher, H ±70°, V ±55° max viewing angles

User interface

Optional analog-resistive touchscreen, 12 softkeys, 4 hardkeys, key backlighting - blue, adjustable, 1 encoder with push click to enter


1 multicolor LED and 3 status LEDs, 1 light sensor


32-bit, 800 MHz, I.MX6


512 MByte DDR2 RAM, 4 GByte mass storage, 32 KByte serial EEPROM


2 CAN ISO 11898, supports extended CAN frames (29-bit CAN-ID) active,
1 EIA-232 (RS-232) (RxD, TxD, GND), EIA-level,
optional 4 inputs, (analog or digital, selectable via software),
optional 3 digital outputs,
1 USB high speed on main connector, optional 1 USB 2.0 high speed on front, optional Ethernet 10/100 Mbit


3 analog video input (1 live stream), 1 Vpp, supporting PAL and NTSC, free video frame scaling and overlay functionality,
camera control output (open drain) on each interface for special functionality (mirror, shutter, heating etc.)


Main: AMP Seal, 26 pin, power supply, analog/digital I/O
USB: On main connector, optional USB A slot on front,
Video: 5-pole round connector, M12, B-coded
Ethernet: 4-pole round connector, M12, D-coded

Power supply

Max tolerable 9 VDC to 36 VDC

Environmental conditions

Temperatures: Operating −30 °C to +65 °C, storage −40 °C to +85 °C
Protection: IP65 and IP66.
Vibration: 5 g @ 57 Hz to 2 000 Hz, 150 h per axis, shock 30 g, 11 ms, 10 times per axis


e1 and CE mark

Operating system

Embedded Linux Kernel 3.0.0 or higher


OPUS Projektor supporting CANopen®, Generic driver, CANfreestyle, SAE J1939

Advanced programming

Codesys V3.X, programming in C/C++, ISO-VT

Contact us

Have you got questions? Would you like any more information? Are you looking for another operator console not listed here? We will be happy to help you:
Phone: +49-6722-4026-888
Fax: +49-6722-4026-850