Open search


64 I/Os for cabins and electrical cabinets

With its 64 I/Os, Inter Control’s Digsy ICN-D64 CAN-node is suitable for places where many signals have to be read in or transmitted. Thus it is fit to be used in the driver’s cabin or in an electrical cabinet.

The CAN node can be used in a cockpit as well as a control cabinet (Photo: Inter Control)

THROUGH THE MODULE, 28 DIGITAL INPUTS, 6 analog inputs (0 V to 10 V, separately configurable as digital inputs), 2 analog inputs (0 mA to 20 mA), and 4 counter inputs, also configurable as digital inputs or as 2xAB-counter, are available. As configurable outputs, 16 digital outputs (maximum 1 A, separately configurable as digital inputs), 4 PWM outputs (maximum 4 A, separately configurable as digital inputs or outputs), 2 reference voltage sources (5 V, 7,5 V, 8,2 V, 10 V) and 2 current
outputs (10 mA, maximum load 300 Ohm) are also included. All outputs
are protected against short circuit/overload and can be connected in

The CAN interface enables bit-rates from 20 kbit/s to 1 Mbit/s. The module has an operating temperature of -40 °C to 85 °C. The connection by multi-pin plug-in terminals and the integrated strain relief help to reduce wiring costs. With IP30, the module is suitable to be used in mobile applications regarding its operation voltage, temperature range, shock, vibration, and EMC rigidity. It measures 228 mm x 90 mm.

Publish date

Inter Control


Sponsored links

Company profile

Inter Control