Microchip

CAN FD transceivers

Compliant to ISO 11898-2:2016

[2018-05-15] Microchip offers a series of transceiver chips, which are qualified for 5 Mbit/s respectively 2 Mbit/s. Some products support stand-by functionality.

Read on

Infineon/Toyota

CAN transceivers

Zero defects in four years

[2018-05-02] Infineon received a quality award from Toyota’s Hirose Plant. This is the tenth time that German chipmaker was awarded by the Japanese carmaker.

Read on

Renesas

Automotive micro-controller

Provides 10 CAN FD ports

[2018-04-04] Renesas announced the sample shipment of the RH850/E2x on-chip flash memory micro-controller (MCU) using a 28-nm process technology.

Read on

IC-Sense

Embedded World 2018

CAN transceiver on an ASIC

[2018-03-06] IC-Sense (Belgium) offers high-voltage ASICs for automotive diagnostics. It contains CAN high-speed and single-wire transceivers.

Read on

Bosch

Embedded World 2018

CAN FD core supports CiA 603 time‑stamping

[2018-03-06] The M_CAN core by Bosch will support hardware time-stamping according to CiA 603 in the next release. Up to sixteen 32-bit time-stamps are possible.

Read on

NXP

Transceiver

Secures CAN without cryptography

[2018-02-06] NXP has announced a CAN transceiver family which provides several cyber security features. It complements crypto-based security solutions with an additional layer in a Defense-in-Depth (DiD) concept, or as a stand-alone option.

Read on

Cypress

Touchscreen controller

Supports acoustic and haptic feedback control

[2018-01-31] At CES 2018, Cypress has introduced the Truetouch CYAT817 family. The AEC-Q100-qualified chips feature CAN and LVDS connectivity.

Read on

Allegro

Power management IC

Supplying power for CAN transceivers

[2018-01-25] The ARG82800 is an Asil-D PMIC for automotive control units, providing four power rails for CAN, µC/DSP, sensors, memory, and other loads in the device.

Read on

Nexperia

Surface mount devices

In-vehicle network protection diodes for CAN

[2018-01-18] Nexperia, the former Standard Products division of NXP, announced in-vehicle network protection diodes. Compared to former products, they offer higher surge current, greater ESD robustness, and an improvement in ESD clamping performance.

Read on

Texas Instruments

5-Mbit/s CAN FD chip

Stand-alone controller with on-chip transceiver

[2018-01-09] Texas Instruments (TI) has launched the TCAN 4550 stand-alone CAN FD protocol controller. On-chip is also a 5-Mbit/s qualified transceiver.

Read on

Autotalk

CES 2018

Chipsets for DSRC-based communication

[2018-01-05] Autotalks (Israel) and ST Microelectronics (France) present jointly at CES the Craton2 chipset respectively the Telemaco3 single-chip MCU. CAN FD is one of the interface options for the in-vehicle networks.

Read on

Texas Instruments

SoC platform

Image signal processor with CAN FD support

[2018-01-04] Texas Instruments (TI) has released the DRA76 and TDA2P system-on-chips (SoC). They are designed for automotive applications.

Read on

Maxim

Isolated transceivers

Fault-protection enables robust communication

[2017-12-14] The MAX14878, MAX14879, and MAX14880 are isolated CAN transceivers. They provide fault‑protection, which enables robust communication.

Read on

Cypress / Glyn

32-bit MCU

48-MHz Cortex M0+ with on-chip CAN

[2017-12-14] Cypress has introduced the PSoC 4100 S-series Plus. It includes an CAN option.

Read on

Mornsun

Transceiver

With 1500-VDC potential isolation

[2017-12-12] The TLAxx-03KCAN CAN transceiver series from Mornsun (China) integrates a 3-W AC/DC power supply and can directly be connected to the 220-VAC power lines.

Read on

CAN in Automation

Do not confuse customers!

“We are still missing small industrial µC with ISO CAN FD”

[2017-12-04] At SPS IPC Drives 2017, visitors asked at the CiA booth on the availability of industrial micro-controllers featuring on-chip CAN FD modules.

Read on

NXP

Micro-controller

Cortex-M7 processor features two CAN on-chip modules

[2017-11-22] NXP’s i.MX RT family of MCUs addresses price-sensitive applications with high-performance requirements. The Arm-based 600-MHz chips feature an interrupt latency of 20 ns.

Read on

Microchip

8-bit MCU

Improving response time to critical systems on CAN

[2017-11-16] Microchip’s PIC18 product line has been expanded to include a series of 8-bit micro-controllers (MCUs) that combine a CAN module with an array of Core Independent Peripherals (CIPs).

Read on

Infineon

CAN FD transceiver

Features 5 Mbit/s

[2017-11-09] Infineon (Germany) has released the CAN FD TLE925x transceiver family. They comply with ISO 11898-2:2016.

Read on

NXP

Cortex-M0+ micro-controller

Features bluetooth and CAN FD connectivity

[2017-11-07] NXP has launched the Kinetis KW36 family of MCUs. It is AEC Q100-Grade 2 temperature range qualified.

Read on

Nolam / Reflex CES

FMC mezzanine module

CAN IP core on board

[2017-11-02] Nolam Embedded Systems and Refelex CES have teamed up to provide FPGA-based boards. This includes products with CAN connectivity.

Read on

NXP

32-bit micro-controller

Platform for electronic control units

[2017-10-26] NXP’s S32 micro-controller has been selected by eight of 15 automakers for upcoming models. The AEC-Q100-qualified S32K family provides ISO CAN FD connectivity.

Read on

STMicroelectronics

Processors with security

Protecting cars against cyber threats

[2017-10-19] STMicroelectronics protects connected cars against cyber threats with its latest automotive processors that feature built-in security and CAN moduls.

Read on

Multicore micro-controller

Usage in advanced driver-assistance systems

[2017-10-12] Nvidia, supplier of ADAS electronic control units and ECUs for automated driving, has chosen the Aurix processors by Infineon. They are used as a safety compute element and vehicle interface for the Drive PX 2 AI hardware platform.

Read on

Microchip

Stand-alone controller

Supports CAN FD

[2017-09-27] Microchip offers the MCP2517FD, a stand-alone CAN FD controller. It allows designers a simplified path to upgrade from Classical CAN to CAN FD.

Read on

ST Microelectronics

Automotive micro-controllers

With up to eight CAN FD ports

[2017-09-26] STMicroelectronics (ST) has shipped more than 150 million parts of its SPC5 micro-controller family. The chips are mainly used in automotive applications.

Read on

Changan Automotive

Cooperation

Chinese automaker selects CAN transceiver

[2017-09-12] Changan Automobile (China) and NXP agreed to cooperate on infotainment and future vehicle technologies. This includes the i.MX8 processors and CAN transceivers.

Read on

Microchip

Micro-controller

Cortex-M4 processor with two CAN FD ports

[2017-08-10] Microchip has announced the SAM E5x micro-controller family. The 32-bit MCUs are intended for industrial applications.

Read on

Maxim

CAN transceiver

With ±60-V fault protection

[2017-08-10] The MAX14883E transceiver is optimized for industrial applications. It features a ±60-V fault protection, a ±25-V functional common mode input range, and a ±10-kV ESD protection on the bus lines.

Read on

Texas Instruments

System-on-chip

Connects CAN to Industrial Ethernet

[2017-07-25] Texas Instruments (TI) has launched the Sitara AMIC110 system on chip (SoC) featuring more than ten Industrial Ethernet protocols. It comes with CAN connectivity.

Read on

SYS TEC

IoT chip

Available with development kit and application note

[2017-07-19] The free programmable, plug-in core of the electronics service provider SYS TEC electronic for a direct cloud connection is now available with a development kit and a first application note.

Read on

Microchip

Transceiver

CAN FD and CAN partial networking

[2017-07-10] The ATA65XX family by Microchip supports CAN FD and CAN PN (partial networking compliant to ISO 11898-2:2016. It features a temperature range of -40 °C to +150 °C.

Read on

Cypress

40-nm MCU

Supporting CAN FD

[2017-06-30] Cypress has introduced further members of its Traveo family. They are suitable for instrument clusters or body electronics.

Read on

System-on-Chip

Digital cockpits: Not just for passenger cars

[2017-06-20] The chipmakers provide dedicated System-on-Chip (SoC) solutions for digital cockpits. Some of them are equipped with CAN FD on-chip modules.

Read on

Gateway MCU

Dedicated for protocol conversion

[2017-06-20] The RZ/N1 family by Renesas provides up to five Ethernet ports and two CAN interfaces. The products are based on the Cortex-M3 cores.

Read on

System-on-Chip

For smart cameras

[2017-06-19] Renesas has introduced a hardware platform series for advanced driving assistance systems (ADAS) and automated driving systems. First product is the R-Car V3M System-on-Chip.

Read on

CAN IP core

Supports time-stamping

[2017-06-14] Cast has announced that the functionality of its CAN IP cores has been extended. Time-stamping of messages is now possible.

Read on

Automotive chipset

Bridges to CAN FD and Ethernet-AVB

[2017-06-12] The TC9560AXBG by Toshiba is an integrated circuit connecting Ethernet-AVB and for example CAN FD networks. It comes in a 10 mm x 10 mm LFBGA package.

Read on

Microchip

32-bit micro-controller

Support for up to four CAN interfaces

[2017-06-01] Microchip announced another family of PIC32 micro-controllers called PIC32MK. The MCUs include four integrated MCUs for precision dual motor control applications and eight MCUs packed with serial communication modules for general-purpose applications...

Read on

ON Semiconductor

CAN FD transceiver

Supports data rates up to 5 Mbit/s

[2017-05-29] ON Semiconductors has launched the NCV7351F transceiver, which complies with ISO 11898-2:2016. It is qualified for bit-rates up to 5 Mbit/s.

Read on

Infineon

Transceivers

Toyota warded Infineon’s products

[2017-05-16] The German chipmaker was acknowledged by the Japanese automaker for delivering CAN transceivers of outstanding quality.

Read on

ST Microelectronics

Door-zone IC

Combines power-management and failsafe-circuitry

[2017-04-24] STMicroelectronics (ST) has launched automotive door-zone controllers featuring CAN high-speed transceiver with selective wake-up functionality.

Read on

Texas Instruments

CAN FD demonstrator

With 20 nodes at a 40-m network

[2017-04-20] Texas Instruments (TI) has developed a CAN FD kit to demonstrate its 5-Mbit/s transceiver chips. The linear network topology features varying stubs with up to 2 m.

Read on

Yamar

Transceiver

CAN over Powerline

[2017-04-13] The DCAN500 transceiver by Yamar (Israel) is designed to transfer CAN messages over the DC power-lines.

Read on

Renesas

Microprocessor

Provides industrial network interfaces

[2017-03-31] Renesas has announced the RZ/N series of industrial networking communication microprocessors (MPUs) that enables network-based application development. CANopen is supported.

Read on

NXP

Micro-controller

Platform for automotive ECUs

[2017-03-30] NXP has launched the S32K1 ARM-based MCU family. All members provide ISO CAN FD connectivity and are supported by a software suite.

Read on

SE Spezial-Electronic

Isolation transceiver

CAN FD-ready

[2017-03-23] SE Spezial-Electronic (Germany) distributes the TD301MCAN and TD501MCAN series’ of CAN transceivers from Mornsun (China). The series can be updated to CAN FD.

Read on

Synapticon

System-on-Chip

Powering embedded drives

[2017-03-23] At the Embedded World, Synapticon presented products based on its Somanet System-on-Chip (SoC). The chip provides several communication interfaces including CAN.

Read on

Pico Technology

Embedded World 2017

CAN FD: Products appear quick and slowly

[2017-03-20] The tradeshow in Nuremberg confirmed it: The automotive industry has adopted CAN FD quickly, while the non-automotive device suppliers are still waiting for chips.

Read on

Cypress

Embedded World 2017

MCUs to drive body electronics platform

[2017-03-15] At the Embedded World tradeshow, Cypress announced that Continental is going to use the Traveo II family for several body control units. The MCUs provide multiple CAN FD interfaces.

Read on

CiA

Secure transceiver

Engineering samples are available

[2017-03-13] NXP has developed a CAN FD transceiver with cyber security features. This includes an ID whitelist and a bus-load measuring capability.

Read on

NXP

With two CAN FD modules

Cortex-M4-based MCU with integrated display controller

[2017-02-24] NXP has announced the LPC5400 family of micro-controllers, which supports 21 interfaces. The products are intended also for industrial applications.

Read on

Sys Tec

Embedded World 2017

IoT chip: Insert – ready – cloud solution

[2017-02-02] SYS TEC Electronic (Germany) has developed a freely programmable IoT (Internet of Things) chip for a direct cloud connection without a gateway. It comes with an CANopen interface.

Read on

Olimex

32-bit micro-controller

Provides up to two on-chip CAN modules

[2017-01-23] The GD32 micro-controller of Gigadevices is pin-compatible with the STM32 products by ST Microelectronics. The MCU family is based on a Cortex M3 core by ARM.

Read on

ON Semiconductor

CAN transceiver

Connecting a CAN controller to the bus-lines

[2017-01-19] The NCV7351 CAN transceiver by ON Semiconductor is the interface between a CAN protocol controller and the physical bus and may be used in both 12-V and 24-V systems.

Read on

STMicroelectronics

Cortex-M3 micro-controller

Dedicated for Telematics applications

[2017-01-12] STMicroelectronics has launched the Telemaco3 single-chip MCU family. The STA1195 ARM-based micro-controller provides three Classical CAN and two CAN FD on-chip modules.

Read on

Renesas

32-bit micro-controller

For radar-based applications with six CAN FD modules

[2017-01-04] Renesas has announced the RH850/V1R-M micro-controller. It includes a DSP unit for processing radar signals and local high-speed serial interfaces. Samples will be available in the second half of 2017.

Read on

Cast

CAN FD core

25 projects finalized in 2016

[2017-01-03] Cast selling the CAN FD core by Fraunhofer IPMS has announced that last year 25 design-ins have been managed. The core complies with ISO 11898-1:2015.

Read on

Renesas

CAN FD micro-controller

For safety-critical automotive functions

[2016-12-21] Renesas has release the RH850/P1L-C group of micro-controllers as low-end models in the RH850/P1x-C series. The MCUs are designed for use in chassis and safety systems, such as anti-lock brake and airbag systems.

Read on

STMicroelectronics

40-nm MCU

CAN FD micro-controller runs at 400 MHz

[2016-12-08] STMicroelectronics has released the STM32H7 series of micro-controllers, which embeds the highest SRAM memory (1 MiB) of the STM32 platform. The MCUs support CAN FD.

Read on

Innovasic

Next acquisition

Analog Devices buys Innovasic

[2016-11-29] Analog Devices recently acquired Linear Technology. It now buys Innovasic, which produces the legendary 82527 stand-alone CAN controller.

Read on

STMicroelectronics

SPS IPC Drives 2016

High-end graphics, audio, and CAN FD

[2016-11-22] Full-digital instrument panels that give a high-end feel to any car are coming to the mid and entry ranges, through technology from ST. Its chip integration brings a digital head unit with features like smartphone mirroring.

Read on

Infineon

Electronica 2016

CAN FD transceivers with 5 Mbit/s

[2016-11-08] Infineon (Germany) speeds up in-vehicle communication and now provides the TLE925x CAN FD transceivers. They come in a 3 mm x 3 mm package.

Read on

Wabco

Truck-trailer link

ISO 11992-1 transceiver available again

[2016-11-03] Wabco has announced that its transceiver for truck-trailer networks is distributed by Blume-Elektronik. This gives third parties the chance to buy the ASIC and integrate it in ECUs.

Read on

Cast

Collaboration

CAN FD solution bundle

[2016-11-03] Cast and Avery Design Systems have partnered. They deliver a pre-configured and pre-verified solution bundle for system developers needing a CAN FD controller for automotive and industrial applications.

Read on

Infineon

Automotive MCU

Micro-controller with 12 CAN FD ports

[2016-10-25] Infineon has introduced the second generation of its Aurix MCU family. The TC3xx micro-controllers come with multiple on-chip CAN FD channels as well as up to 24 LIN ports.

Read on

Renesas

32-bit MCUs

Safe and secure communication

[2016-10-25] Renesas offers the 32-bit RX65N and RX651 groups of micro-controllers. Besides other networks, they use CAN for communication.

Read on

Infineon

For Ethercat gateways

Micro-controller with up to six CAN modules

[2016-10-24] The XMC4300 and XMC4800 micro-controller by Infineon is suitable for CAN-to-Ethercat gateways. Besides the Ethercat slave, there are up to six independent CAN cores on the chip.

Read on

NXP

MCU cluster

For sophisticated HMIs

[2016-10-13] The i.MX8 series of multi-core processors features three CAN FD on-chip modules. They are dedicated for automotive cockpits, but also suitable for industrial human machine (HMI) interfaces.

Read on

Xilinx

CAN FD core

IP core with 8-bit host interface

[2016-10-13] Xilinx provides the CAN-CTRL core for its FPGA families supporting Classical CAN and CAN FD. Optionally, it features an AMBA-APB interface for ARM-based host controllers.

Read on

Digital Core Design

IP core

Scalable, 32-bit, and CAN

[2016-10-12] The D32PRO from Digital Core Design (Poland) is a 32-bit, embedded, and royalty-free IP core. The core provides a CAN interface.

Read on

Digital Core Design

Standalone

Configurable CAN FD controller

[2016-09-28] The DCAN FD by Digital Core Design (Poland) is a standalone controller for CAN used in automotive and industrial applications. It conforms to the CAN 29-bit-identifier extended frame format and CAN FD.

Read on

ARM

Micro-controller

Functional safety applications

[2016-09-23] The Cortex-R52 by ARM was designed to address functional safety in systems that need to comply with ISO 26262 (ASIL D) and IEC 61508 (SIL 3). ST Microelectronics is the first chip vendor, which licensed the processor.

Read on

HMS/Beck IPC

Beck IPC acquired

HMS still on shopping tour in Germany

[19.07.2018] HMS Industrial Networks (Sweden) has acquired Beck IPC (Germany). The German company offers the IPC@Chip family providing IIoT functionality and CAN connectivity.

Read on

NXP

Multi-core MCU

Dedicated for Asil-D applications

[17.07.2018] The S32S micro-controller by NXP features up to eight CAN FD interfaces. The 800-MHz MCU is intended for automotive safety ECUs.

Read on

Dual-core MCU

Master core provides CAN FD connectivity

[03.07.2018] Microchip has introduced the dsPIC33CH dual-core micro-controller optimized for motion control applications. This includes drones as well as automotive fans and pumps.

Read on